NUX NXB10DUAL Dual Vlog System

NU-X B-10 Vlog wireless system is a super lightweight wireless, mini compact designed clip & go. The TX features a built-in omnidirectional electret condenser microphone sending clear, broadcaster-grade audio via 2.4gHz digital transmission to the camera RX.

Other features include automatic setup, 2.4gHz interference free broadcasting frequency, and 24-bit/44.1kHz high quality audio transmitting. The signal latency is super low and less than 5ms. The operation range is around 100-feet (30m).

The additional hot-shoe mount can stack 2 x RX’s on the camera, so you can use 2 B-10 Vlog systems for interviews. (We include a Y-Cable for 2 vs 2 application)

The user-friendly matching system makes it easy to use, just turn on both wireless units (TX & RX) then it will be paired within a couple of seconds. Each wireless set has a unique pairing algorithm, it automatically detects each other and configures their own IDs. The signal never interferes with any other wireless including the WIFI* signal

* Recommended: Please stay 2m (6-feet) away from the WIFI router for the best performance.

Features:

2.4 GHz Broadcast – interference free
24-bit / 44.1kHz audio signal quality
Less than 5ms latency
Super lightweight & mini compact designed to clip & go
Transmitter features a built-in Omnidirectional Electret Condenser microphone
Up to 100-feet (30m) distance at open air areas
Specifications:

Sound Quality: 24-bit / 44.1 kHz Hi-Resolution Sound Quality
Frequency Response: 50Hz – 20kHz
Latency: Less than 5ms
Range: Up to 100-feet (30m) line-of-sight
Dynamic Range: 96db
Operating Band: 2.4GHz
THD + Noise: < 0.2% @1KHz
Built-in Battery Capacity (TX & RX): 400mAh/3.7V
Maximum Input Level (3.5mm TRS): 100mVrms (-20dBV)
Battery Run Time: Up to 4 hrs
Microphone on TX: Omnidirectional Electret Condenser microphone
Maximum Sound Pressure Level: 110dB SPL
Dimensions: TX/RX – 51mm (L) x 42mm (W) x 13mm (H)
Weight: TX/RX – 28g each